Cylinder without Base Can/Stubbie/Stubby Cooler/Holder — Product code 001
Fits 375 ml beer and soft drink cans, ‘stubbie/stubby’ beer and cider bottles, as well as many other can and bottle sizes world wide
Especially popular for outdoor festivals, where they can be worn as an arm band, when not in use to keep a drink cold, and can also be packed/posted flat
5 mm neoprene
Wall height: 110 mm, (-/+ 3% variability) covered both sides with jersey (see colour chart links below).
Seams: firstly glued together with 2 part neoprene adhesive, then zigzag stitching full length of the seam, then tacked top and bottom. Also available with black Mauser tape, sewn on with a running stitch (not required for extra strength — only for visual impact).
Blank size (before forming into a cylinder) 210 x 110 mm (-/+ 3 % variability)
Printing Techniques Available
Single colour Screen Print
Minimum print run 50.
38 Neoprene colors available (see colour chart) and these can be mixed within the order, in minimum multiples of 10.
Plenty of room, for a ‘two sided/front and back’ print. I suggest two 90 x 90 mm art blocks, with a 10 mm gap between. 85 to 90 mm is the visible width of a cooler ‘face’ — so no need to rotate the cooler, to read a message/logo, if kept to this size.
Plenty of room, for a ‘two sided/front and back’ print. I suggest two 90 x 90 mm art blocks, with a 10 mm gap between. 85 to 90 mm is the visible width of a cooler ‘face’ — so no need to rotate the cooler, to read a message/logo, if kept to this size.
Pricing is affected (slightly) by artwork area, and amount of colors printed, so please attach preliminary art to the quote page, or describe in the comments box. Art areas available are 100 x 90 mm, 190 x 45 mm, 145 x 65 mm, 190 x 55 mm, 190 x 70 mm, 100 x 140 mm, 190 x 90 mm.
You are not limited to picking your Neoprene colour from the colour chart. The background colour (which becomes the cooler colour) is printed at the same time as your unlimited colour art, over the top of white neoprene blanks (inside colour black). Once printed, none of the white is left showing.
We are unable to mix the background colors, within an order — each would be a new print run (minimum 24).
Art size maximum 190 x 90 mm (if supplying artwork, your background colour needs to be 220 x 120 mm, which fully covers the 210 x 110 mm blanks, with some ‘bleed off’).
Plenty of room, for a ‘two sided/front and back’ print. I suggest two 90 x 90 mm art blocks, with a 10 mm gap between. 85 to 90 mm is the visible width of a cooler ‘face’ — so no need to rotate the cooler to read a message or logo, if kept to this size.
