Zip-Up Wine and Beer Bottle Cooler/Holder — Product Code 007
Fits most 750 ml wine bottles, 750 ml ‘tallie/longneck’ beer bottles in Australia as well as many other 750 ml bottle sizes world wide
5 mm neoprene
Base: (inside diameter) 75 mm (-/+ 3% variability) ‘checker plate’ raw neoprene (helps the cooler grip to table tops). Fixed in place with a 2 part neoprene adhesive
Product height: 210 mm (-/+ 3% variability) covered both sides with jersey (see colour chart links below).
Seams (x 2): firstly glued together with 2 part neoprene adhesive, then zigzag stitching full length of the seam, then tacked top and bottom.
Light gauge nylon zip, with metal slider. Sewn in place using running stitch and have metal staples fitted, to prevent slider loss.
Printing Techniques Available
Single colour Screen Print
Minimum print run 50.
38 Neoprene colors available (see colour chart) and these can be mixed within the order, in minimum multiples of 10.
Art size maximum: front panel 110 x 140 mm, back panel 110 x 50 mm
110 mm is the visible width of a cooler ‘face’ so no need to rotate the cooler to read a message/logo if kept to this size.
Pricing is affected (slightly) by artwork area, and amount of colors printed, so please attach preliminary art to the quote page, or describe in the comments box. Art areas available are 100 x 90 mm, 190 x 45 mm, 145 x 65 mm, 190 x 55 mm, 190 x 70 mm, 100 x 140 mm, 190 x 90 mm.
You are not limited to picking your Neoprene colour from the colour chart. The background colour (which becomes the cooler colour) is printed at the same time as your unlimited colour art, over the top of white neoprene blanks (inside colour black). Once printed, none of the white is left showing.
We are unable to mix the background colors, within an order — each would be a new print run (minimum 24).
