Velcro Wrap Around Can/Stubbie/Stubby/Bottle Cooler/Holder — Product code 003

Fits 375 ml beer and soft drink cans, ‘stubbie/stubby’ beer and cider bottles, as well as many other can and bottle sizes world wide
Especially popular for outdoor festivals, where they can be worn as an arm band, when not in use to keep a drink cold, and can also be packed/posted flat
5 mm neoprene
Wall height: 110 mm, (-/+ 3% variability) covered both sides with jersey (see colour chart links below)
Seams: formed by pressing together two separate Velcro strips, which are fixed with black running stitching. One Velcro strip is a flap style, which folds inside the cooler
Blank size (before forming into a cylinder) 210 x 110 mm (-/+ 3 % variability) + overhanging 30 x 105 mm black Velcro flap

Printing Techniques Available

Minimum print run 50.
38 Neoprene colors available (see colour chart) and these can be mixed within the order, in minimum multiples of 10.
Ink colour can be mixed to closely match corporate/logo colors (see single colour screen print).
Art size maximum 170 x 90 mm (smaller than the 002 style, to avoid running stitch of the Velcro interfering with the print)
Plenty of room, for a ‘two sided/front and back’ print. I suggest two 75 x 75 mm art blocks, with a 10 mm gap between. 85 to 90 mm is the visible width of a cooler ‘face’ — so no need to rotate the cooler, to read a message/logo, if kept to this size.

Minimum print run 200.
38 Neoprene colors available (see colour chart) and these can be mixed within the order, in minimum multiples of 10
Art size maximum 170 x 90 mm (smaller than the 002 style, to avoid running stitch of the Velcro interfering with the print)
Ink colors can be mixed to closely match corporate/logo colors (see plastisol transfer print).
Plenty of room, for a ‘two sided/front and back’ print. I suggest two 75 x 75 mm art blocks, with a 10 mm gap between. 85 to 90 mm is the visible width of a cooler ‘face’ — so no need to rotate the cooler, to read a message/logo, if kept to this size.
Pricing is affected (slightly) by artwork area, and amount of colors printed, so please attach preliminary art to the quote page, or describe in the comments box. Art areas available are 100 x 90 mm, 190 x 45 mm, 145 x 65 mm, 190 x 55 mm, 190 x 70 mm, 100 x 140 mm, 190 x 90 mm.

Minimum print run 24.
You are not limited to picking your Neoprene colour from the colour chart. The background colour (which becomes the cooler colour) is printed at the same time as your unlimited colour art, over the top of white neoprene blanks (inside colour black). Once printed, none of the white is left showing.
We are unable to mix the background colors, within an order — each would be a new print run (minimum 24).
Art size maximum 190 x 90 mm (if supplying artwork, your background colour needs to be 220 x 120 mm, which fully covers the 210 x 110 mm blanks, with some ‘bleed off’).
We can get close, but not exact corporate/logo colour matching (see dye sublimation print).
Plenty of room, for a ‘two sided/front and back’ print. I suggest two 75 x 75 mm art blocks, with a 10 mm gap between. 85 to 90 mm is the visible width of a cooler ‘face’ — so no need to rotate the cooler to read a message or logo, if kept to this size.